ePED® Panic touch bar N3702
Product description
For use in conjunction with a permitted lock as a panic touch bar to secure the second door leaf or in combination with an additional emergency exit door terminal.
Use with and without release delay, with four-wire bus cabling in Hi-O technology.
Electrically controlled touch bar panic function to secure the panic lock against misuse.
Overview of Advantages
- panic touch bar as per EN 1125
- Electrically controlled panic function
- Extension and external activation via the Hi-O bus
Note
- ePED touch bars are custom-manufactured for the desired base profile length. Dimensions cannot be changed at a later stage.
- As a general rule, such custom-made products cannot be returned or cancelled.
- Indicate the length of the base profile with a tolerance of ±1 mm when placing orders.
Current consumption 24 V DC | 500 mA |
Control function | Yes, Hi-O technology |
Panic function | Gesteuert |
Operating and display function | No |
Power supply | No, external power supply is necessary |
Connection | 4-wire bus |
Illuminated pictogram | No |
Release delay | Yes (optional) |
Emergency Push Button | No |
Control element | No |
Initial configuration | With an additional door terminal |
Required power supply | 24 V (±10 %) DC SELV |
Operating temperature range | -10 °C – +55 °C |
Relative humidity | < 95% (non-condensing) |
Area of application | For indoor use |
Class of protection | IP30 (if completely installed) |
Mounting dimensions | 900-1430 mm |
Base profile length | 850-1380 mm |
Total length | Base profile + 80.5 mm |
Backset | ≥ 35 mm |
Installation height | 100 mm |
DIN-direction | Universal |
Push bar profile | Stainless steel |
Sabotage switch | Yes |
Inputs | None; using Hi-O bus extension |
Outputs | None; using Hi-O bus extension |
Amount of bus addresses | 1 |
Expandable | Yes, using Hi-O bus |
Certified in compliance with | EltVTR; DIN EN 13637:2015 |
Order number | Description |
---|---|
N370200xxxx0000 | Controlled; without display terminal |